
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
For Your Every Summer RSVP, with Code: SUMMER15
Description
8205451 Microwave Latch Bracket - For Whirlpool & KitchenAid Microwaves8205451 WP8205451 Microwave Door Latch & Switch Bracket Key Features Secure Interlock Switch Housing: Specifically engineered to hold the door micro switches in precise alignment, ensuring the safety interlock system correctly detects when the door is fully closed and locked. Reinforced Structural Frame: Manufactured from a high density, heat stabilized polymer designed to withstand the mechanical stress and vibration of the microwave door being
8205451 / WP8205451 Microwave Door Latch & Switch Bracket
Key Features
- Secure Interlock Switch Housing: Specifically engineered to hold the door micro-switches in precise alignment, ensuring the safety interlock system correctly detects when the door is fully closed and locked.
- Reinforced Structural Frame: Manufactured from a high-density, heat-stabilized polymer designed to withstand the mechanical stress and vibration of the microwave door being opened and closed thousands of times.
- Precision-Molded Latch Receivers: Features exact-tolerance openings for the door hooks, providing a smooth, positive latching action that prevents the door from feeling loose or "sagging" during operation.
- Safety-Critical Component: Acts as the foundation for the microwave’s safety circuit; the bracket ensures that switches are depressed in the correct sequence to prevent accidental microwave leakage.
Replaces / Cross-Reference Part Numbers
- WP8205451
- AP6012058
- PS11745265
- W10298900
- 8205451
- AP3776470
- PS972837
- 1065792
- AH972837
- EAP11745265
Compatibility & Fitment
This latch bracket is a standard internal component for many Whirlpool-manufactured over-the-range and countertop microwaves. Key compatible brands include:
- Whirlpool & KitchenAid: Fits hundreds of models including MH1140XMQ, KHMS155LSS, WMH31017AS, and the Velos series.
- Maytag & Amana: Compatible with various MMV and AMV series units (e.g., MMV1153AAW, AMV1150VAS).
- Kenmore (665 Series): Fits many 665-prefix high-end microwaves produced by Whirlpool for Sears.
- Estate & Roper: Direct fit for dozens of budget-friendly models utilizing the standardized Whirlpool latch assembly.
- Note: This bracket is located inside the cabinet behind the control panel. It is not the handle or the hooks on the door itself.
When to Replace
- Microwave Won't Start: The most common symptom; if the plastic mounting tabs on the bracket are cracked, the switches won't align with the door hooks, preventing the "Start" signal from engaging.
- Microwave Runs with Door Open: **EXTREMELY UNSAFE:** This indicates the bracket is broken or warped, causing a switch to be permanently stuck in the "closed" position. Replace immediately.
- Door Won't Stay Latched: If the internal receiver slots are worn or snapped, the door hooks won't catch properly, causing the door to pop open during a cycle.
- Intermittent Power: Vibration during a cycle causes the door switches to lose contact because the bracket is loose or damaged.
- Broken Plastic Tabs: Upon inspection, you see visible cracks or missing pieces of plastic where the micro-switches are supposed to snap into place.
Installation Tips
- Safety First: You MUST unplug the microwave. **DANGER:** Microwaves contain a high-voltage capacitor that can store a lethal charge even when unplugged. Do not touch internal electrical components without discharging the capacitor.
- Accessing the Bracket: You will need to remove the outer cabinet/wrapper and the control panel to access the screws holding this bracket to the front frame.
- Switch Transfer: Take a photo of the wiring and switch positions before removal. Carefully unclip the 2 or 3 micro-switches from the old bracket and snap them into the exact same positions on the new 8205451.
- Test the Latch: Before reassembling the outer cabinet, manually close the door to ensure the hooks enter the bracket cleanly and that you hear the distinct "click" of the switches being depressed.
- Alignment Check: Ensure the bracket is screwed in tightly. If it is misaligned by even a few millimeters, the safety interlock circuit may fail to complete, and the microwave will not heat.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy