
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
For Your Every Summer RSVP, with Code: SUMMER15
Description
DD81-02635A Dishwasher Drain Pump for SamsungDD81 02635A Dishwasher Drain Pump for Samsung Key Features High Efficiency Centrifugal Impeller: Specifically designed to generate high velocity suction to quickly evacuate dirty water and food particles through the drain hose, preventing "standing water" at the bottom of the tub. Triple Tab Twist Lock Mount: Features a standardized Samsung mounting interface that allows for a tool free "twist and click" installation into the sump housing once the
DD81-02635A Dishwasher Drain Pump for Samsung
Key Features
- High-Efficiency Centrifugal Impeller: Specifically designed to generate high-velocity suction to quickly evacuate dirty water and food particles through the drain hose, preventing "standing water" at the bottom of the tub.
- Triple-Tab Twist-Lock Mount: Features a standardized Samsung mounting interface that allows for a tool-free "twist and click" installation into the sump housing once the locking tab is released.
- Precision-Balanced Motor: Engineered for low-vibration operation, reducing cabinet noise and vibration during the final stages of the wash and rinse cycles.
- Thermal Overload Protection: Includes an internal safety sensor that automatically shuts down the motor if it becomes jammed with debris, preventing electrical shorts and protecting the dishwasher's main control board.
- Viton-Grade Internal Seals: Manufactured with high-performance rubber seals that resist the corrosive effects of concentrated detergents and high-temperature water, ensuring a leak-proof lifespan.
Replaces / Cross-Reference Part Numbers
- AP6807450
- PS12593038
- EAP12593038
- 4958703
- B20-3A01
- 11001011000729
- PD00060208
Compatibility & Fitment
This drain pump is the standard replacement for many modern Samsung "Next-Gen" and "StormWash" series dishwashers. Key compatible models include:
- Samsung DW80CG Series: DW80CG4021SRAA, DW80CG4051SRAA, DW80CG5451SRAA.
- Samsung DW80M Series: DW80M2020US/AA, DW80M2020US, DW80M2020UB.
- Samsung DW80N Series: DW80N3030UB/AA, DW80N3030US/AA, DW80N3030UW/AA.
- Samsung DW80R Series: DW80R2031US, DW80R2031UB.
- Note: Specifically for the Drain Pump (evacuation). If your dishwasher isn't spraying water, you likely need the Circulation (Wash) Pump instead.
When to Replace
- Standing Water in Tub: The wash cycle finishes, but several inches of dirty water remain in the bottom of the dishwasher, indicating the pump is not activating or is jammed.
- "5E" or "SE" Error Code: Samsung dishwashers display this specific code when they detect a drainage failure or an electrical fault in the drain pump circuit.
- Loud Grinding/Humming: A loud mechanical noise during the drain portion of the cycle usually means a piece of glass or a bone has entered the pump and damaged the impeller.
- Pump Leaking: Water is dripping from the motor housing or the twist-lock seal, which can trip your home’s GFCI outlet or damage the kitchen floor.
- Continuous Draining: The pump runs constantly, even when the tub is empty, often caused by a shorted motor or a faulty flood sensor triggered by a pump leak.
Installation Tips
- Safety First: You MUST unplug the dishwasher or turn off the circuit breaker. This pump is located under the unit and requires handling electrical connectors in a potentially wet area.
- The "Towel Ready" Rule: Even if the tub looks empty, there will be about a quart of water trapped in the sump and drain hose. Lay a large towel down before removing the old pump.
- Check for Obstructions: Before installing the new DD81-02635A, stick your finger (carefully) into the sump hole where the pump mounts to ensure no glass shards or cherry pits are waiting to jam the new impeller.
- The Locking Tab: To remove the old pump, you must depress a small plastic locking tab on the sump housing before twisting the pump counter-clockwise. Don't force it, or the sump housing may crack.
- Hose Inspection: While the unit is pulled out, check the Drain Hose for kinks or "clogged grease" buildup. A new pump cannot push water through a blocked hose.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy