TrueRC X-Air 5.8 MK II for DJI FPV (1pc)

TrueRC X-Air 5.8 MK II for DJI FPV (1pc)The immensely popular X AIR for DJI FPV is redesigned in this new, more compact, version. Same great performances with much less footprint. Easier to pack up when mounted and allows more up tilt angle. The X AIR MK II for DJI install on the two left or right antenna ports in either vertical or horizontal position. The horizontal position allows up to 80deg up tilt so even if you tend to look at the ground while flying, you can keep the antenna aiming

The immensely popular X-AIR for DJI FPV is redesigned in this new, more compact, version. Same great performances with much less footprint. Easier to pack up when mounted and allows more up tilt angle.

The X-AIR MK II for DJI install on the two left or right antenna ports in either vertical or horizontal position. The horizontal position allows up to 80deg up tilt so even if you tend to look at the ground while flying, you can keep the antenna aiming forward.

Two options for using this setup.

Purchase two of these and run on both sides.

Purchase one of these and two stubbies as per photos.

Specifications

• Bandwidth: 5.1GHz-6.7GHz
• Gain: 9.5-10.5 dBic
• Polarisation: RHCP or LHCP
• Beam-width*: 120deg 1
• Beam-width @-3dB**: 68deg. ‘
• Connector: SMA male
• Dimension: 32 x 72 x 16mm
• Weight:
• Include all hardware to mount on DJI FPV goggles. - 1 Antenna in total

*Coverage where reception is at least equivalent to an omni.
**Coverage where at least 70% of the max range is obtained.

Useful print!

• SMA thumbwheel cable side
• SMA thumbwheel back side

Browse More

• Browse all TrueRC Antennas
• Browse all DJI Compatible Antennas
• Browse all Antennas