Thunder Tiger Pro .40 Sealed Bearing Kit

Thunder Tiger Pro .40 Sealed Bearing KitThunder Tiger Pro . 40 Sealed Bearing Set (1) Front 3 8x7 8x9 32 (1) Rear 15x28x7 FastEddy Bearings offer the highest quality bearings available. Our engine bearing sets include: (1) Front & (1) Rear engine bearing. We ship the bearings with 2 rubber seals. In many cases depending on your application you may want to remove one or both seals. We recommend that you look at the set you are removing to decide what seal s to remove. To remove a rubber

Thunder Tiger Pro .40 Sealed Bearing Set

• (1) Front 3/8x7/8x9/32
• (1) Rear 15x28x7

FastEddy Bearings offer the highest quality bearings available. Our engine bearing sets include: (1) Front & (1) Rear engine bearing.

We ship the bearings with 2 rubber seals. In many cases depending on your application you may want to remove one or both seals. We recommend that you look at the set you are removing to decide what seal/s to remove.

To remove a rubber seal, simply slip a thin sharp knife tip or needle under the edge of the seal and lift up.

You are purchasing the bearings listed above.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you are get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.