Pixel FlexLED RGB+WW+CW Medium Frequency Group Chip Control

Pixel FlexLED RGB+WW+CW Medium Frequency Group Chip ControlThe Pixel FlexLED RGBWCW is the worlds first high CRI, mid frequency pixel strip with grouped control, delivering unmatched brightness, rich colour blending, and smooth low end dimming. Powered by an 8 bit pixel dimming, each group of 6 LEDs on the 24V (or 3 LEDs on the 12V) is addressable, allowing dazzling effects while optimizing performance and power efficiency across longer runs. Operating at a medium frequency of 4khz PWM frequency, this strip

The Pixel FlexLED RGBWCW is the world’s first high-CRI, mid-frequency pixel strip with grouped control, delivering unmatched brightness, rich colour blending, and smooth low-end dimming. Powered by an 8-bit pixel dimming, each group of 6 LEDs on the 24V (or 3 LEDs on the 12V) is addressable, allowing dazzling effects while optimizing performance and power efficiency across longer runs.

Operating at a medium frequency of 4khz PWM frequency, this strip is flicker-free up to 133fps and ideal for typical camera work in film, broadcast, and theatrical environments. Designed with redundancy in mind, the strip includes a backup data line for mission-critical installations. Compatible with Advatek's Mk3 controllers via ArtNet or sACN or any pixel controller that supports WS2805 (or WS2811 with special patching).

Key Features:
 • Group-Controlled Pixel Output – Individually addressable every 6 LEDs (24V) or 3 LEDs (12V)
 • Medium 4kHz PWM – Flicker-free performance up to 133fps
 • High CRI RGB+WW+CW Output – Same premium LEDs as our FlexLED RGBWCW AIO series
 • Smooth Dimming – Smooth 8-bit dimming
 • Built-In Data Redundancy – Secondary data line for fail-safe installations
 • Available in Indoor, Weatherproof, and Waterproof versions

Installation & Power Considerations:
 • Fixed PWM Frequency – 4kHz for safe standard camera use
 • Prevent Voltage Drop – Power from both ends and inject power mid-strip for long runs
 • Separate Power Sources – Controller and strip can use independent power supplies
 • Verify Voltage During Testing – Use a voltmeter at contact pads to confirm consistent voltage

Additional Details:
 • Maximum run length: 10 meters (32.81’) – with power injection at both ends
 • Controller, power supply, and extension cables sold separately
 • Quantity discounts and custom specifications available (CCT, pixel density, PCB colour)
 • Pricing is for 5 meters (16.4’) – custom lengths available

Soldering Guidelines:
 • Use a soldering iron between 360°C and 372°C (680°F ~ 702°F)
 • Limit heating of each pad to 3 seconds to prevent delamination

The Pixel FlexLED 24V RGB+WW+CW is our brightest and most reliable pixel strip yet—engineered for professionals who demand flawless performance, vibrant colour, and seamless control.

Need a custom solution? Contact us today!

DOWNLOADS

1. Specification Sheet

2. UL Certificate of Compliance
3.  Declaration of Conformity (CE & RoHS)
4.  REACH Report 1907/2006