Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Kawasaki CARBURETOR-ASSY15003-2777A worn or clogged carburetor is one of the most common causes of poor engine performance this genuine OEM replacement fixes it right the first time. Compatibility FR series (verify your model number before purchasing) FS series FX series Important: Always verify your exact engine model number and serial number before purchasing. Kawasaki engine series share many part numbers but not all parts are interchangeable between variants. Part Details OEM Part
A worn or clogged carburetor is one of the most common causes of poor engine performance — this genuine OEM replacement fixes it right the first time.
✅ Compatibility
- FR series (verify your model number before purchasing)
- FS series
- FX series
⚠️ Important: Always verify your exact engine model number and serial number before purchasing. Kawasaki engine series share many part numbers but not all parts are interchangeable between variants.
🛠️ Part Details
- OEM Part Number: 15003-2777
- Replaces: Verify with your Kawasaki dealer or engine manual
- Brand: Kawasaki — Genuine OEM
- Type: Original Equipment Manufacturer (OEM) replacement
⭐ Key Features
- Genuine OEM construction — matches original factory specifications exactly
- Precisely calibrated main and pilot jets for correct air-fuel ratio
- Includes all necessary gaskets and seals for a complete installation
- Corrosion-resistant body designed for outdoor equipment environments
- Plug-and-play fit — no modifications required
🔧 What Problem This Solves
- Engine hard to start or won't start at all
- Rough or unstable idle speed
- Loss of power under load or at full throttle
- Black smoke from exhaust (rich condition)
- Fuel leaking from the carburetor body or bowl
- Engine surging or hunting at steady throttle
📏 Specifications
- Part Name: Carburetor Assembly
- Material: Zinc alloy body with brass jets and rubber gaskets
- Manufacturer: Kawasaki
- Condition: New — Genuine OEM
🔨 Installation
- Difficulty: Moderate
- Tools Required: Flathead and Phillips screwdrivers, 8mm and 10mm wrenches, Needle-nose pliers, Carburetor cleaner spray
- Estimated Time: 30–60 minutes
- Tip: Always consult your Kawasaki engine service manual for torque specifications and step-by-step procedures.
💪 Why Choose This Part
Replacing with a genuine Kawasaki carburetor eliminates guesswork and avoids the repeated frustration of cheap aftermarket failures.
🛒 Order With Confidence
✓ Genuine OEM — Guaranteed Fit — This is a genuine Kawasaki OEM part backed by the manufacturer's quality guarantee. If you have any questions about compatibility, provide your engine model and serial number and our team will confirm fitment before you purchase.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 1308 reviews
Sort
Product Reviews
★★★★★ 5
edger
given as gift but I liked the weight and ease of handling. Seemed well made and simple to use. I was pleased with size and features.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 1, 2026
★★★★★ 3
Nice Edger as long as the blade doesn't come loose -- and it will come loose, repeatedly!
Probably could've/should've rated this 2 stars yet it works well when it works. I purchased this edger to edge my drive and sidewalks and not for trenching. The edger arrived very quickly after I ordered it (I am not a Prime member so this was a nice surprise). Assembly was easy and straight-forward. The first use went smoothly and the edger performed flawlessly and provided clean, smooth edging. About 20 minutes into the second use I noticed that the edger was cutting and quickly determined that the blade was spinning freely -- fortunately the hex nut was still attached to the threaded shaft. I reviewed the manual that came with the edger, grabbed the correct sized socket and torque wrench. I removed the hex nut, the first washer, the blade and then the second washer. To install I followed the directions ensuring that the flats of the washer aligned with the flat on the shaft and tightened the hex nut to the specified 140 in-lbs. The edger worked well for about 10 minutes and the blade once again became loose. This time I replaced the original blade (which did not need to be replaced from a wear perspective) with a new B&D blade and new washers. Once again I followed the instructions and this time the edger performed flawlessly until about 5 minutes remaining in my edging when once again the blade came loose. my experience has most certainly been frustrating to say the least. one should not need to carry a socket and torque wrench with them and repeatedly need to tighten the blade. So, when the edger performs as intended it does an excellent job at edging; however I have no confidence that this edger will be able to perform as intended throughout repeated uses and more importantly has shown that it cannot complete my edging without requiring tightening the blade (which requires disassembly down to the second keyed washer). Potential buyers should be prepared for this experience and make your decision accordingly. Note: I tried contacting black and decker via twitter (@blackdeckerhome) and never received a response; I could not find a separate customer service/support twitter account. Trying to contact customer service via the phone these days is an exercise in patience to say the least.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 11, 2022
★★★★★ 5
Trimmer results
Was alittle hesitant with this being B&D
But I was surprised how great it really is.
By far way above my expectations. Works like a charm and does a great job. Chose electric because I really don't have other than a driveway to do. But it really did good around the flower beds.
Cord limits you alittle but nothing to cry about. Quiet also but still use ear plugs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 5
Easy to use
Style: 20V Pwr Drv Trimmer (LST522-CA)
Light weight perfect for edging around the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
★★★★★ 5
Works great-easy-breezy!
Style: 20V Pwr Drv Trimmer (LST522-CA)
Wifey loves this!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026