Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Satin Metallic Mineral Grey Vinyl Wrap (SMT01)Most greys read cold and flat. TeckWrap's Mineral Grey doesn't. It carries a warm golden glow that lifts the grey toward bronze where the light hits. Key attributes: Golden glow: warm satin metallic grey that shifts toward bronze and gold in changing light Engineered finish: pressure sensitive high grade Renolit polymeric film with air release channels for a smooth, even satin Clean chemistry: Henkel solvent based acrylic adhesive, transparent and
Most greys read cold and flat. TeckWrap's Mineral Grey doesn't. It carries a warm golden glow that lifts the grey toward bronze where the light hits.
Key attributes:
- Golden glow: warm satin metallic grey that shifts toward bronze and gold in changing light
- Engineered finish: pressure-sensitive high-grade Renolit polymeric film with air-release channels for a smooth, even satin
- Clean chemistry: Henkel solvent-based acrylic adhesive, transparent and removable, peels residue-free
- Flawless application: high-grade release liner keeps the film protected for an even, smooth satin lay-down
- Heat-conformable: shapes over curves, mirrors, and recessed panels
- Paint-safe: removable adhesive protects the factory paint underneath
Mineral Grey sits in the warm corner of the grey family. Most greys lean cool and industrial, but this one runs warm, a sophisticated gunmetal that catches a golden bronze flash as the car moves through light. It reads understated from a distance and reveals the metallic warmth up close, which is what makes it work on a luxury SUV or executive sedan as easily as a clean show build. Next to a flat cool grey it looks richer and more deliberate, less paint-shop primer and more bespoke finish.
TeckWrap Satin Metallic Mineral Grey compared to OEM greys:
- Closest to a satinized Audi Terra Grey
- Same warm bronze cast as a BMW Manhattan Metallic
- Same gunmetal-and-gold lean as a Range Rover Zadar Grey
- Warmer than a Mercedes Selenite Grey
- More golden than a flat Audi Nardo Grey
Love those warm factory greys on a Range Rover or an Audi? Now put that golden gunmetal on your Range Rover Sport, A7, or X5.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 294 reviews
Sort
Product Reviews
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Great for using behind me on Zoom calls
Color: Black, Size: 1 Large Panel
This works great as a place to put tapestries behind me when I'm on Zoom calls... much nicer than blurring out the background. Easy to put together, large, works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
Good quality, very adorable solution.
Color: Black, Size: 1 Large Panel
Easy to put together and take apart. Wish it had a storage bag of some sort—that would be very helpful. Used it for our mom while she was on hospice at home. The wheels made it very easy to move around as necessary. Nice and tall and wide for privacy. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 7, 2025
★★★★★ 4
Nice, large room divider for privacy
Color: Black, Size: 1 Large Panel
Easy to assemble. Fabric screen covers the large frame very well and provides privacy by separating spaces. I would not exactly call it sturdy, but it does the job and stands freely with no problem. It’s lightweight and portable if you need to move it. Came with a screwdriver and wrench tool for assembly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 7, 2026
recommand products
MCCAFE PREMIUM ROAST K CUP COFFEE PODS 94 CT #ROCK VALUE-ORDER BY TUESDAY EVENING JUNE 30 ARRIVING JULY 08 FOR DELIVERY#
48.59
LIBBYS VIENNA SAUSAGE 4.6 OZ 18 CT #ROCK VALUE-ORDER BY TUESDAY EVENING JUNE 30 ARRIVING JULY 08 FOR DELIVERY#
15.40
Evelyne Bag Gen III Epsom PM
1380.00
Diamond CC Wallet on Chain Embossed Striated Patent
675.00
Evelyne Bag Gen I Clemence PM
1447.50