Reflective DTF Gang Sheet
SKU: 81548106949

Reflective DTF Gang Sheet

Sale price$19.01 Regular price$21.12
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Reflective DTF Gang SheetThank you for your interest in our listing for Silver Reflective DTF film, which offers a silver reflective coating to your design's, Shine bright and get noticed with Reflective DTF. A semi transparent reflective layer is added to your entire design. The colors will be slightly dulled, but in direct light will flash bright white. Perfect for activewear, uniforms, or adding reflective accents to your designs. It adds a visually appealing and eye

Thank you for your interest in our listing for Silver Reflective DTF film, which offers a silver reflective coating to your design's, Shine bright and get noticed with Reflective DTF. A semi-transparent reflective layer is added to your entire design. The colors will be slightly dulled, but in direct light will flash bright white. Perfect for activewear, uniforms, or adding reflective accents to your designs. It adds a visually appealing and eye-catching touch to your DTF transfers, creating a vibrant and dynamic appearance.

Similar application process to standard DTF, Silver Reflective  DTF transfers adhere to all fabric types in any color, including cotton, polyester, nylon and rayon, Better hand-feel than vinyl with Ultra-fine details with no weeding required, Long-lasting shimmer and shine that withstands wash after wash

Create premium, reflective apparel at home. Great for uniforms, safety wear, or adding a creative element to your designs.

  • Note: Your entire design will receive a layer of reflective coating. This is a semi-transparent silver / gray coating, so colors will be less vibrant.

This Is a Cold Peel DTF Transfers****

Easy Application

  • To ensure your DTF transfer looks professionally pressed every time, follow these five simple steps.

    1. No Need To Pre-Press Or Pre-Iron: Removing moisture is unnecessary. Only do a prepress if you so desire.
    2. Position Your Design: Take your time to line up your transfer in the desired location on your item. Normally, there is no need to use heat-resistant tape on flat heat presses to keep your design in place, however, it is highly recommended when pressing transfers onto hats or when using an iron to keep the transfer in place. You’ll get a feel for when this is needed. For more precise positioning, use DTF Alignment Ruler Set.
    3. Press: Press your transfer with medium pressure at 310°F / 155°C for 15 seconds. You cannot damage the transfer by pressing with more heat, pressure, or time -- within reason. However, too much heat can damage your garment, so test first and use parchment paper or a protective guard sheet to protect your garment from a direct iron.
    4. Let It Cool. Then Peel It: After pressing, let your transfer rest until it is cool to the touch (minimum of 15-30 seconds). To speed up the cooling process, use Fast Cool Peel Air Transfer Blower. Once cool, lift the transfer from one corner and gently peel back. We have a saying in the dojo, which is, don’t use your hands, use your EYES. This ensures every piece of your design is adhering to your item. If not, stop peeling, lay it back down, and troubleshoot as follows -- (1.) If some or all of the design does not transfer AND it was cool when peeling, it means there was not enough heat, pressure, or time. Press your transfer again with more pressure and time first (+5-10 seconds). (2.) If that doesn’t work, try 15°F heat increments until you find the sweet spot. You truly cannot damage the transfer by pressing multiple times.
    5. Final Press & Wash Instructions: Place the parchment paper included or a single layer of t-shirt material over the design and press again for 15 seconds to soften the design, increase durability, and remove shine. If you want a shiny finish, cover it with a protective guard sheet for the final press. When washing, flip the shirt inside out, wash on cold, and dry using low heat or hang.
  • Image Guidelines

  • The original image must be a minimum of 300 dpi and in PNG, SVG, or JPEG format.
  • Note: enlarging a 300dpi image (i.e. from 3" to 9") and exporting it may cause pixelation and quality issues.
  • Color shifts can occur when converting to CMYK for DTF printing.
  • Do not mirror your image, and please use transparent or removed backgrounds (unless you want the background printed).
  • We recommend a minimum of 7.5px/0.25" for small fonts or thin lines to ensure the ink and powder is applied properly.
  • Avoid neon glow, gradients, and soft edges. DTF printers can have issues printing these designs accurately.
  • We print what we receive. Spelling, placement, sizing, and image quality will not be fixed by our team.

Pricing

  • Only pay for what you print
  • We charge down to the sub-1-inch area
  • No fee for unused areas on the gang sheet
  • No fee for the padding area for easy cutting

Recommended Equipment:

For the best results, we strongly recommend using a commercial heat press for DTF transfers.

Pre-Press Steps:

  • Pre-press your garment for 5-10s to eliminate moisture and wrinkles.
  • If aligning your design with a fold, do this before pre-pressing.

*Please note: If the image does not transfer completely when peeling, repress with the image in place for 5-10 seconds, let it cool again, and re-peel the film.

**Using parchment for post-press will produce a more matte design. Using Teflon for post-press will produce a glossier design.

Care Instructions: Turn the garment inside out. Machine wash cold. No bleach. No softener. Tumble dry low. Do not dry clean oriron

We stand behind the quality of the transfers we print for you. If you are not satisfied, 

  • We’ll reprint your DTF transfers for free if there’s a defect with your order that includes the following:
    • Image quality issues when using a 300-DPI image
    • Adherence issues
    • Damage caused by shipping

Try our other DTF Transfers products!

Looking to brighten up your designs and make them stand out even more? check our specialty DTF Transfers

  • Pearl DTF Transfers
  • Glitter DTF Transfers
  • Sublimation Transfers
  • Glow in the Dark Transfers
  • Reflective Transfers
  • Gold DTF Transfers
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 81548106949

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1078 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jon
Lexington, US
★★★★★ 5
Trusted company
Flavor Name: Berry, Size: 30 Servings (8.0 Ounce) (Pack of 1)
Great product
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
J
Verified Purchase
JF
Grantham, US
★★★★★ 5
Great for recovery
Flavor Name: Berry, Size: 30 Servings (8.0 Ounce) (Pack of 1)
Really helps with post work out recovery. I feel noticeably less sore when I take this after a workout. Definitely prefer the lemon flavor over the berry.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
D
Verified Purchase
Dan
Phoenix, US
★★★★★ 3
Great formula, but desperate for an unflavored option
Flavor Name: Berry, Size: 30 Servings (8.0 Ounce) (Pack of 1)
I’ve been incorporating Thorne’s Amino Complex into my daily stack, and from a nutritional standpoint, it’s hard to beat. The clinical dosing of essential amino acids is exactly what I’m looking for to support my recovery and fitness goals. Thorne is usually my go-to for purity and quality, and this product is no exception when it comes to the actual ingredients. ​However, the flavor profile is a significant drawback. To be blunt: the flavors are just not good. They feel chemically and overly sweet, which makes it a chore to drink rather than a supplement I look forward to. ​I would much prefer an unflavored and unsweetened version. Having the option to just mix the raw powders into water or my own beverage without the unnecessary flavorings and sweeteners would be a game-changer. If you’re sensitive to artificial tastes or just prefer a "cleaner" experience, the current options might be a struggle. ​Pros: ​High-quality amino acid profile. ​Trusted brand with great sourcing. ​Cons: ​Flavors are unpleasant and too sweet. ​No "naked" or unflavored option available.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2026
A
Verified Purchase
Adrienne
New York, US
★★★★★ 5
Taste and Quality are Excellent!
Flavor Name: Vanilla, Size: 30 Servings (Pack of 1)
Thorne has a reputation for high quality products so I thought I’d try this whey protein. It tastes really good! I find it easy to digest, and it dissolves easily. I plan to make this my go-to whey protein.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
N
Verified Purchase
Nina Miller
Boise, US
★★★★★ 5
Definitely sweet but good mixed
Flavor Name: Vanilla, Size: 30 Servings (Pack of 1)
The vanilla would be too sweet on it's own for me but with strawberries and spinach it's perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2025

recommand products