One Hour Ceramic - Snow Owl

One Hour Ceramic - Snow OwlOne Hour Ceramic, Luxury Interior paint formulated with ceramic technology for durability. ONE HOUR CERAMIC is 100% acrylic matte wall paint, formulated with ceramic microspheres that offers superior stain resistance properties. Fingerprints, soil, grease, and many other stains wash off with mild soap and water without harming the film. Recommended for interior walls and ceilings. One Hour Ceramic offers spatter resistant application with unparalleled

One Hour Ceramic, Luxury Interior paint formulated with ceramic technology for durability.

ONE HOUR CERAMIC is 100% acrylic matte wall paint, formulated with ceramic microspheres that offers superior stain resistance properties. Fingerprints, soil, grease, and many other stains wash off with mild soap and water without harming the film. Recommended for interior walls and ceilings. One Hour Ceramic offers spatter resistant application with unparalleled coverage and wash-ability.

ONE HOUR CERAMIC is self-priming on drywall and cured plaster or masonry substrates, bare metal or wood should be primed with Wise Owl Stain Eliminating Primer. The ONE HOUR CERAMIC is a durable low odor, low VOC product making it perfect for any room in your home. The luxurious matte finish combines a satin smooth finish with the depth of color typically found in enamels.

SURFACE PREPARATION: Surface must be dry and free of dirt, oils, and loose flaking paint. This product will adhere with ease to most surfaces that are clean, dry, and dull. When priming is needed, Wise Owl Stain Eliminating Primer is recommended.

APPLICATION: Stir thoroughly before using. ONE HOUR CERAMIC may be applied by brush, roll or airless spray. To achieve the best results use a high quality synthetic brush and 3/8” nap woven roller cover. Flow on generously, brushing lightly from the unpainted into the painted areas. For spray application, this product may be thinned with water NOT TO EXCEED ONE PINT PER GALLON.

CLEAN UP: Clean brushes and roller in soapy water immediately after painting.

TECHNICAL DATA: Recommended spreading rate is 350 to 400 sq. ft. per gallon. Finish will dry to the touch in approximately 1 hour. Another coat can be applied within 4 hours. Do not apply when surface temperature is below 50 degrees F. Thin sparingly with water.