10.75 X 17 RMP™
SKU: 4121121804

10.75 X 17 RMP™

Sale price$54.00 Regular price$60.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

10.75 X 17 RMP™RMP Tactical Backpack Insert Rigid Panel stays upright in backpack Attach MOLLE style pouches to organize your gear Customize with Adhesive Backed Loop to accept Velcro Hook Pouches Use GMT backer plates to hard mount a variety of accessories Universal fit, check compatibility chart for sizing 0. 25" holes on edge for mounting with screws 1" slots for attaching handles or mounting with 1" webbing The RMP was designed for modular organization on a


 


RMP Tactical Backpack Insert 


- Rigid Panel stays upright in backpack

- Attach MOLLE style pouches to organize your gear

- Customize with Adhesive Backed Loop to accept Velcro Hook Pouches

- Use GMT backer plates to hard mount a variety of accessories

- Universal fit, check compatibility chart for sizing

- 0.25" holes on edge for mounting with screws

- 1" slots for attaching handles or mounting with 1" webbing 

    The RMP was designed for modular organization on a rigid platform that allows vertical organization within a backpack. Quick access to your gear is enhanced by the consistent positioning and customizable layout. When inserted into any bag, it gives you the tactical ability to organize your mission critical gear on an interchangeable platform that can be swapped out or quickly reorganized as the mission changes.


    Product Specifications


    Width: 10.75" (273.05mm) 

    Height: 17" (431.8mm)

    Thickness: 0.188" (4.77mm)

    Material: High Strength Polyethylene 

    Weight: 10.75 ounces (354.369 grams)



    Backpack Compatibility


    The 10.75in x 17in RMP Backpack Insert fits:

    - 5.11 Tactical Rush 24 Main Compartment
    - 5.11 Tactical COVERT 18 Main Compartment
    - Evergoods CPL-24
    - GoRuck Rucker 20L Main Compartment
    - GoRuck GR1 21L Main Compartment
    - Hazard 4 Second Front Backpack Main Compartment
    - Maxpedition Riftcore
    - Mystery Ranch 3DAP/CL
    - Triple Aught Design TAD FAST Pack Lightspeed
    - Vertex EDC Ready Bag
    - Any bag with interior dimensions equal to or greater than 10.75in wide x 17in tall

     

    Securing RMP inside Backpack

    For Backpacks with Internal Webbing:

    Some backpacks have MOLLE webbing sewn inside. You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods.

    For backpacks with Internal Velcro Loop:

    - Purchase "Low Profile Hook - Adhesive Backed - 3/4" Width" from GMT. 

    - Ensure the panel is cleaned with an alcohol wipe and completely dry.

    - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

    - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

    - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

      For any backpack without internal MOLLE webbing:

      Hydration Bladder Loop

      - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. Use Velcro one wrap or Grimloc.

      Grommet / Chicago

      - Punch a hole in the fabric and secure a grommet to prevent ripping. Use a chicago screw to secure the panel to the grommet.

      Adhesive backed Velcro

      To adhere the Adhesive backed Velcro Hook tape to your RMP panel:

      - Ensure the panel is cleaned with an alcohol wipe and completely dry.

      - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

      - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

      - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        To adhere the Loop side adhesive backed velcro to the backpack:

        - Once Velcro Hook is adhered to the panel, stick the velcro loop onto that strip on the panel as well so it is perfectly lined up

        - Flip your backpack inside out so you get an unobstructed view of the interior back panel of the bag that the rigid molle panel will fit against

        - Peel the plastic off the adhesive backed velcro loop (leaving the velcro loop stuck in place on the RMP)

        - Line up the entire RMP where you want it in the backpack and stick it down in place. Press firmly to ensure Velcro Loop side has stuck to bag, and then peel the panel/velcro hook away from the bag, careful to leave the velcro loop in place inside the bag.

        - Press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. Apply heat from a hair dryer to warm up the bag and the velcro loop tape, enabling the adhesive to "run" or liquefy enough to seep into the bag fabric for a better bond.

         

        Attaching Holsters with Quick Detach Platforms


        Set Backer Plate into punch out from back of RMP panel at desired location.
        - Accessories with multiple backer plates may need the backer plates to be oriented properly for either vertical or horizontal mounting
        - Pass screws through Female Receiver Plate and into tapped hole of backer plate from the front side of the RMP panel, screw in to secure.
        - Screw the Male Plate onto the Holster.
        - If desired mount additional Female Receiver Plates onto a belt loop, MOLLE webbing of bag or vest elsewhere, separate RMP panel in a vehicle, storage case, safe door etc. Anywhere you mount additional Female Receiver Plates will allow you to quickly secure the piece of gear that has the Male Plate to that item. The same procedure can be used to attach any accessory that requires backer plates

         
         


        Attaching MOLLE Pouches


          
          
          
          

         

        Upgrading to accept Velcro Hook/Loop Pouches


        To upgrade any RMP to accept Hook backed pouches, morale patches, or accessories follow the below steps:
        To adhere the Adhesive backed Velcro Loop tape to your RMP panel:
        - Purchase "Low Profile Loop - Adhesive Backed - 1" Width" from GMT. 
        - Ensure the panel is cleaned with an alcohol wipe and completely dry.
        - Peel the backing off the adhesive backed velcro tape and place the loop section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.
        - Apply heat from a hair dryer to warm up the panel and the velcro, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.
        - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        Shipping Notes
        • Free Standard Shipping on $100+ Orders to the USA.
        • Except Preorder products are shipped in 48 hours.
        • Delivery to the USA:
        1. Standard Shipping : 3-10 business days
        • If time is of the essence, please consider selecting expedited delivery for faster service.
        Exchange/Return Notes
        • We offer a 30-day return/exchange service after receiving.
        • Final sale items are not eligible for returns or exchanges.
        • To process your return/exchange, please contact us at [email protected]
        • Please click here for more details>>> Return & Exchange Policy
        SKU: 4121121804

        Discover Niche Categories That Outsell

        Top-Converting Item to Boost Your Average Order

        4.2 ★★★★★
        Based on 637 reviews
        Sort
        Highest Rating
        Newest First
        Oldest First
        Product Reviews
        L
        Verified Purchase
        Linda Carol Allen
        Phoenix, US
        ★★★★★ 5
        Great product for rv
        This is an excellent product. The front of our camper was very faded from the sun even though we keep it under a cover. After four coats, it looks like a different RV. We are going to do the entire camper. The difference is amazing. You will be so happy with the results. We would give it a 10 if possible.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on October 19, 2025
        R
        Verified Purchase
        Royal foil
        Waukegan, US
        ★★★★★ 5
        Amazing fiberglass restoration.
        So easy to use and fabulous results. A few years back I had tried Maguires products to restore the shine on a 5th wheel. That was so labor intensive and the results were struggled to achieve faded quickly. I hesitated to Poli Glow due to the cost and our prior attempts lackluster results. I was able to get the restoration kit at a discount on Black Friday through the stores website and tackled the camper with the temps between 60-90 as instructed. I bought 2 of those kits just to find out that due to the climate and UV exposure the number of coats I would need for the Poli Glow was going to exceed the amount I had on hand through the 2 restoration kits. So I had to scramble to buy another bottle of Poli Glow. Applying this product is just time consuming and not difficult. Make sure to properly prepare the surface before using poliglow. The whole system turn a badly oxidized camper into a shiny finish. I am truly shocked. Hopeful the results will last a while. 5th wheel camper 40 foot long. I have used 3 poliglow bottles (12 coats), 1 bottle poli ox, 1.5 bottles of Poli wash (of course, not in that order). I potentially need 1 more bottle of Poli Glow to finish nose cone/basement area (basement area is still in good condition so may not do this area if I can get the nose cone with the remainder of the Poli glow I have.)
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on January 19, 2026
        K
        Verified Purchase
        Kindle Customer
        Massapequa, US
        ★★★★★ 4
        Worth the time and effort.
        After proper surface prep and 6 applications, my badly sun damaged RV shined like new, with many compliments. However, after a few months under the cover, the fiberglass surfaces that were in contact with the occasionally wet cover in the Florida sun discolored badly, and will have to be wet sanded and the coating re-applied. Also, the polish does not hold up well where boat fenders rub against the coating, and it wears away in cockpit areas that are heavy hand traffic, like hatchways and around handrails. Overall a decent product, I will probably re-apply in a couple seasons.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on September 23, 2025
        R
        Verified Purchase
        Randy Brown
        Port Orchard, US
        ★★★★★ 5
        Brings old paint back to life.
        Best product for fiberglass oxidation. Tried many different wax’s and compounds. Poly Glow did what the wax could not do.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on April 29, 2026
        L
        Verified Purchase
        L. D. Wlson
        Omaha, US
        ★★★★★ 5
        The beautiful shine!!!!
        Wow so amazing!!!!! I have a 35 ft trailer you will need 2 bottles for two coats. Well worth the price.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on May 25, 2026

        recommand products